Rubber Corner Guard - Installation Guide

Installing Rubber Corner Guards with Screws

1) Clean and dry the corner surface thoroughly.

2) Position the guard against the wall. Each guard comes with pre-drilled, countersunk holes and self-tapping screws.

3) Secure the guard in place by driving the screws through the holes.

Installing Clear Corner Guards with Glue

1) Clean and dry the corner surface thoroughly.

2) Apply a thin, even layer of strong adhesive or construction glue to the inner surfaces (the wings) of the guard.

3) Press the guard firmly against the wall, starting from the bottom and working upward. Hold in place until the glue sets, then allow adequate curing time as recommended by the adhesive manufacturer.

Rubber Corner Guard - Installation Guide

Send us your enquiry if you have questions or comments about our products and services.